Shopping Cart ショッピングカート

Select your language Select your language

Which is the right set for you? あなたにぴったりのセットは?

Smart Doll's are available in two different flavors - a "Sports Bra Set" & "Apparel Set." Guys normally wear bra's at home when nobody is looking but our Smart Doll guys don't which is why we've given them a pair of Boxer Shorts instead. If you are buying a Smart Doll for the first time then choosing either set is enough - you do not need to get anything else in addition - but extra accessories will enhance your Smart Doll experience.
 If you are going to keep your Smart Doll at home or in the office and prefer them skimpy then go for the Sports Bra Set - but the Apparel Set is way better value for your cash.

Choose the Apparel set if you plan on taking them out n about - and save money at the same time as it will cost you more to buy the apparel set items separately. If you take them out in the Sports Bra Set then they may catch a cold. Alternatively you may want to go for the Sports Bra Set and then choose to customize the look and feel of your Smart Doll by buying additional apparel items. You can see what items the current Apparel Set consists of on this page.
スマートドールは二つのセットで用意しています。「Sports Bra Set」と「Apparel Set」だ。スポーツブラセットにはスポーツブラと下着が付いています。ブラーを密かに家で着用している男子は世の中にいますが、スマートドール男子はそんなことやりません。なのでボクサーショーツを履かせています。

お家やオフィスで肌露出多めに展示したい場合はスポーツブラセットは十分ですが、アパレルセットはかなりお得。スマートドールを外に連れて行く目的であればアパレルセットをオススメします。スポーツブラセットで外に連れて行くと、スマートドールちゃんは風邪をひくかもしれないのでご注意ください。 もしくはスポーツブラセットを選んでいただき、スマートドールのアパレルでご自分でコーディネートできます。

現在のアパレルセット内容はこのページでご確認できます。

Would you like to remove the Instabewbs filter for all busts in product listings? You can change your preferences in the footer menu. 商品一覧に出ているおっぱい写真のインスタバストフィルターを非表示にしますか?設定は今後フッターで変更できます。

Which is the right body type for you? あなたにぴったりのボディータイプは?

While the head and hands will be vinyl - you have a choice of two different types of body - one is referred to as Cortex and the other as Vinyl. Both body types are pre-built.

Both are made from the same 3D data and share pretty much the same shape and form - all our apparel, accessories and body parts are compatible with both body types. The fundamental difference is the material and the way they are constructed. Vinyl being more expensive does not make it better than Cortex. Neither type is more superior than the other and they both have their own strengths depending on your needs.

To find out more about the differences then read the Cortex or Vinyl post which should give you more info to make a decision.
スマートドールでは2種類の材質のボディーを展開している。ひとつは「コーテックス」(CORTEX)、もうひとつは「ソフビ」(VINYL) と呼ばれるものだ。別途記載がない限り、どちらの材質を選んでも頭と手はソフビだ。上の画像を見ても違いがわからないという方はコーテックスを選ぶことをお勧めする。コーテックスボディーもソフビボディーも組み立て完成品だ。

コーテックスもソフビも同じ3Dデータから作られており、その形とフォルムはさほど変わらない。アパレルやアクセサリー、ボディーのオプションパーツ(胸、ハンド、ハイ足など)はどちらのボディーにも使える。両者の決定的な違いはその材質と組み立てられ方だ。ソフビはコーテックスより価格が高いだからと言ってコーテックスより優れているということはなく、あなたが何を求めているかによってそれぞれに長所と短所がある。

コーテックスは子どもや初めてファッションドールを手に取る人向けのものだ。ソフビはこのスケールのファッションドールになれたドールユーザーのためにデザインされている。初めてのスマートドール、あるいはお子様のためのスマートドールならコーテックスを選ぶことをお勧めする。

それでももうちょい両者の違いが知りたい方は「コーテックスそれともソフビ製」の記事を読んでください。

Checkout Notes Checkout Notes

Asking for the following will result in a cancellation and refund of your order.

  1. Asking for a discount
  2. Asking us to lower the declaration value of your order
  3. Asking us to ship out ASAP
  4. Asking us to deliver by a particular date
  5. Asking us who shot first - Han or Greedo

Unfortunately we don't own DHL or FedEx (yet) nor do we have celestial powers over a pandemic to guarantee a delivery date on the other side of the world - and we don't enjoy it when people refuse to pay import taxes resulting in goods being returned to us. Not to mention that there are people who reject packages that don't arrive in time for a birthday.

We presume that your order is reliant on such requests being answered.
We can't do any of the above and can't tell you who shot first even though we think it was Han. So don't ask :-)

Asking for the following will result in a cancellation and refund of your order.

  1. Asking for a discount
  2. Asking us to lower the declaration value of your order
  3. Asking us to ship out ASAP
  4. Asking us to deliver by a particular date
  5. Asking us who shot first - Han or Greedo

Unfortunately we don't own DHL or FedEx (yet) nor do we have celestial powers over a pandemic to guarantee a delivery date on the other side of the world - and we don't enjoy it when people refuse to pay import taxes resulting in goods being returned to us. Not to mention that there are people who reject packages that don't arrive in time for a birthday.

We presume that your order is reliant on such requests being answered.
We can't do any of the above and can't tell you who shot first even though we think it was Han. So don't ask :-)

Smart Doll Free 3D Files (STL)

Unlock your entrepreneurial potential with our enhanced 3D Files (STL) section, now featuring data for both sold and prototype products, including Large Busts, cyberpunk shoes, ASL hand gestures, and head sculpts.

Note that the provided data requires modification; direct prints from these files won’t be usable. Data typically comes in "Product" or "Mold" sizes, with the latter occasionally being 3% larger for electroplating. Your experimentations are crucial – achieving desired results demands effort to tailor the data to your needs.

Leverage 3D modeling software like Blender, ZBrush, Maya, or Rhino to alter the data. If you’re unfamiliar with these tools, now might be the time to explore - Blender is free, and resources are available via Google and ChatGPT.

Remember that variations occur in filament and resin shrinkage during printing. Although this data is provided without support, you can find assistance within the community and from ChatGPT.

The data is designed for Smart Doll but anybody can use them to learn, create and monetize ;-) Feel empowered to explore, resize, and remodel - even creating hybrids with other branded products.

Embark on your creative journey and share your innovations with the community. Go forth and create!
Unlock your entrepreneurial potential with our enhanced 3D Files (STL) section, now featuring data for both sold and prototype products, including Large Busts, cyberpunk shoes, ASL hand gestures, and head sculpts.

Note that the provided data requires modification; direct prints from these files won’t be usable. Data typically comes in "Product" or "Mold" sizes, with the latter occasionally being 3% larger for electroplating. Your experimentations are crucial – achieving desired results demands effort to tailor the data to your needs.

Leverage 3D modeling software like Blender, ZBrush, Maya, or Rhino to alter the data. If you’re unfamiliar with these tools, now might be the time to explore - Blender is free, and resources are available via Google and ChatGPT.

Remember that variations occur in filament and resin shrinkage during printing. Although this data is provided without support, you can find assistance within the community and from ChatGPT.

The data is designed for Smart Doll but anybody can use them to learn, create and monetize ;-) Feel empowered to explore, resize, and remodel - even creating hybrids with other branded products.

Embark on your creative journey and share your innovations with the community. Go forth and create!

Millennium Boots

The original files provided can't be used as-is, as they are designed for slush cast molds with funnels attached. However, we've modified these files to make them easier for you to customize. As a result, they will differ from the original product. Reference photos are here. The original files provided can't be used as-is, as they are designed for slush cast molds with funnels attached. However, we've modified these files to make them easier for you to customize. As a result, they will differ from the original product. Reference photos are here.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Smart Doll G04 Head

Smart Doll Free 3D Files (STL) Smart Doll Free 3D Files (STL)
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Cyborg Bust

This Cyborg Bust data was used to make the molds, and thus you need to model out the shoulder sockets and bottom of the bust if you want to use it on your Smart Doll. Further modifications will be needed if you want to use this with the Evolve frame.
Reference photos are here.
This Cyborg Bust data was used to make the molds, and thus you need to model out the shoulder sockets and bottom of the bust if you want to use it on your Smart Doll. Further modifications will be needed if you want to use this with the Evolve frame.
Reference photos are here.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Smart Doll M02 Pear Head

Smart Doll Free 3D Files (STL) Smart Doll Free 3D Files (STL)
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Elf Ear

Elf ear STL file - flip the data to make a pair ;-) Reference photos are here. Elf ear STL file - flip the data to make a pair ;-) Reference photos are here.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Smart Doll G01 Head

Smart Doll Free 3D Files (STL) Smart Doll Free 3D Files (STL)
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Eye Cradle

Eye Cradle file for you to use as is or modify.. Reference photos are here. Eye Cradle file for you to use as is or modify.. Reference photos are here.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Lady Liberty Accessory Set

Lady Liberty Accessory Set. Reference photos are here. Lady Liberty Accessory Set. Reference photos are here.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Centaur

Heavy modding is required for these files that were created for prototyping purposes - but at least the base files should give you a head start. Do not expect any of these parts to work out of the box. You will need to get hold of some Gen2 frame parts or modify these files to work with Evolve. Only the left legs are included - copy and flip the data to make the right legs. Doll or tail not included. Reference images here. Heavy modding is required for these files that were created for prototyping purposes - but at least the base files should give you a head start. Do not expect any of these parts to work out of the box. You will need to get hold of some Gen2 frame parts or modify these files to work with Evolve. Only the left legs are included - copy and flip the data to make the right legs. Doll or tail not included. Reference images here.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Double Mastectomy Bust

We don't have space cycles to make a double mastectomy bust so here it is for you to print. We don't have space cycles to make a double mastectomy bust so here it is for you to print.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Evolve Frame Head

If you want to display your Evolve frame standalone - I recommend printing this head which fits on the neck peg. If you want to display your Evolve frame standalone - I recommend printing this head which fits on the neck peg.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Evolve Hand

If you want to display your Evolve frame standalone - I recommend printing this head which fits on the wrist pegs. You will have to flip the data to print both hands. If your Smart Doll wants mecha hands then thats cool too ;-) If you want to display your Evolve frame standalone - I recommend printing this head which fits on the wrist pegs. You will have to flip the data to print both hands. If your Smart Doll wants mecha hands then thats cool too ;-)
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Inhaler

Inhaler STL files. Reference photos are here. Inhaler STL files. Reference photos are here.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Crutches

Crutches STL files. You will need to supply the telescopic rod yourself which is the same as the one that comes with the default stands. Reference photos are here. Crutches STL files. You will need to supply the telescopic rod yourself which is the same as the one that comes with the default stands. Reference photos are here.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Insulin Pump and CGM Set

Insulin Pump and CGM set STL files. The image shows just the Insulin device part, but all parts are included in the zip file. You will need to supply a 2mm silicone tube yourself. Reference photos are here. Insulin Pump and CGM set STL files. The image shows just the Insulin device part, but all parts are included in the zip file. You will need to supply a 2mm silicone tube yourself. Reference photos are here.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Cochlear Implant

Cochlear Implant STL files. The image shows just the Cochlear aid sensor part, but both parts are included in the zip file. You will need to supply a 1mm silicone tube yourself. Reference photos are here. Cochlear Implant STL files. The image shows just the Cochlear aid sensor part, but both parts are included in the zip file. You will need to supply a 1mm silicone tube yourself. Reference photos are here.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

BTE

BTE (Behind The Ear Hearing Aid STL files. The image shows just the BTE, but both parts are included in the zip file. You will need to supply a 1mm silicone tube yourself. Reference photos are here. BTE (Behind The Ear Hearing Aid STL files. The image shows just the BTE, but both parts are included in the zip file. You will need to supply a 1mm silicone tube yourself. Reference photos are here.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Adventurer Bust

The Adventurer Bust prototype that didn't make the cut. May revisit and remodel when we get time. But for now - its yours ;-) The Adventurer Bust prototype that didn't make the cut. May revisit and remodel when we get time. But for now - its yours ;-)
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Evolve Frame Support Socket

The Support Socket for the Evolve Frame. The Support Socket for the Evolve Frame.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Smart Doll Distro Head 01

Anime head sculpt that didn't make the cut. Anime head sculpt that didn't make the cut.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Smart Doll Trident Head

If you can tweak this mold to have decent looking nostrils then we should have a chat about your availability for some side work ;-) If you can tweak this mold to have decent looking nostrils then we should have a chat about your availability for some side work ;-)
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Smart Doll Head Cap

Headcap designed for 3D prints. Not a perfect fit depending on what head you are using. Headcap designed for 3D prints. Not a perfect fit depending on what head you are using.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

ASL I Love you hand gesture

ASL "I Love You" gesture - sculpt is not 100% complete. ASL "I Love You" gesture - sculpt is not 100% complete.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Mecha Fist

File contains two parts - designed to be attached to the hand peg. Please becareful not to break the hand peg. File contains two parts - designed to be attached to the hand peg. Please becareful not to break the hand peg.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Cyberpunk Prototype Shoe 01

A cyberpunk-esqe design that didn't make the cut. You will need to hollow out the inside by yourself. A cyberpunk-esqe design that didn't make the cut. You will need to hollow out the inside by yourself.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Boxing Glove

You need to flip the data yourself if you want a pair. You need to flip the data yourself if you want a pair.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Large Bust (with headlights)

Smart Doll Free 3D Files (STL) Smart Doll Free 3D Files (STL)
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

XS Bust

Smart Doll Free 3D Files (STL) Smart Doll Free 3D Files (STL)
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Belt Buckle

A meh belt buckle. A meh belt buckle.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Smart Doll "Hero" Shoe Last

The Last for our Smart Doll feet - you will need this for the patterns that we will distribute soon. The Last for our Smart Doll feet - you will need this for the patterns that we will distribute soon.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Smart Doll "Hero" Shoe Sole

We will sell rubber soles in the future but you can also print them yourself. The sole is bigger than the last to accommodate the leather. We will sell rubber soles in the future but you can also print them yourself. The sole is bigger than the last to accommodate the leather.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

3D Wig Prototype

File contains front and back of the wig - not a perfect fit and you will need to take into consideration the head size. File contains front and back of the wig - not a perfect fit and you will need to take into consideration the head size.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Prosthetic Leg

Smart Doll Free 3D Files (STL) Smart Doll Free 3D Files (STL)
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

No Frills Hangar

A meh hangar. A meh hangar.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Quantum Mask

You will need to tweak neck hole size. Becareful not to scratch face of your Smart Doll. You will need to tweak neck hole size. Becareful not to scratch face of your Smart Doll.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Leather Glove (default hand)

Never got round to making a full set - perhaps you can? Never got round to making a full set - perhaps you can?
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies

Cybernetic Meow Ears

You can use these on their own or with the Cyborg Headcap which will be out soon. You can use these on their own or with the Cyborg Headcap which will be out soon.
Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification. Depending on your printer, filament/resin type, print/slice settings - this data may turn out too small or big for your needs. You need to experiment. Do not print if you expect desired results "out of the box" - you must invest effort to modify the data for your needs. Do not send these files off for printing without modification.
I understand so gimme free goodies I understand so gimme free goodies