Shopping Cart ショッピングカート

Select your language Select your language

Which is the right set for you? あなたにぴったりのセットは?

Smart Doll's are available in two different flavors - a "Sports Bra Set" & "Apparel Set." Guys normally wear bra's at home when nobody is looking but our Smart Doll guys don't which is why we've given them a pair of Boxer Shorts instead. If you are buying a Smart Doll for the first time then choosing either set is enough - you do not need to get anything else in addition - but extra accessories will enhance your Smart Doll experience.
 If you are going to keep your Smart Doll at home or in the office and prefer them skimpy then go for the Sports Bra Set - but the Apparel Set is way better value for your cash.

Choose the Apparel set if you plan on taking them out n about - and save money at the same time as it will cost you more to buy the apparel set items separately. If you take them out in the Sports Bra Set then they may catch a cold. Alternatively you may want to go for the Sports Bra Set and then choose to customize the look and feel of your Smart Doll by buying additional apparel items. You can see what items the current Apparel Set consists of on this page.
スマートドールは二つのセットで用意しています。「Sports Bra Set」と「Apparel Set」だ。スポーツブラセットにはスポーツブラと下着が付いています。ブラーを密かに家で着用している男子は世の中にいますが、スマートドール男子はそんなことやりません。なのでボクサーショーツを履かせています。

お家やオフィスで肌露出多めに展示したい場合はスポーツブラセットは十分ですが、アパレルセットはかなりお得。スマートドールを外に連れて行く目的であればアパレルセットをオススメします。スポーツブラセットで外に連れて行くと、スマートドールちゃんは風邪をひくかもしれないのでご注意ください。 もしくはスポーツブラセットを選んでいただき、スマートドールのアパレルでご自分でコーディネートできます。

現在のアパレルセット内容はこのページでご確認できます。

Would you like to remove the Instabewbs filter for all busts in product listings? You can change your preferences in the footer menu. 商品一覧に出ているおっぱい写真のインスタバストフィルターを非表示にしますか?設定は今後フッターで変更できます。

Which is the right body type for you? あなたにぴったりのボディータイプは?

While the head and hands will be vinyl - you have a choice of two different types of body - one is referred to as Cortex and the other as Vinyl. Both body types are pre-built.

Both are made from the same 3D data and share pretty much the same shape and form - all our apparel, accessories and body parts are compatible with both body types. The fundamental difference is the material and the way they are constructed. Vinyl being more expensive does not make it better than Cortex. Neither type is more superior than the other and they both have their own strengths depending on your needs.

To find out more about the differences then read the Cortex or Vinyl post which should give you more info to make a decision.
スマートドールでは2種類の材質のボディーを展開している。ひとつは「コーテックス」(CORTEX)、もうひとつは「ソフビ」(VINYL) と呼ばれるものだ。別途記載がない限り、どちらの材質を選んでも頭と手はソフビだ。上の画像を見ても違いがわからないという方はコーテックスを選ぶことをお勧めする。コーテックスボディーもソフビボディーも組み立て完成品だ。

コーテックスもソフビも同じ3Dデータから作られており、その形とフォルムはさほど変わらない。アパレルやアクセサリー、ボディーのオプションパーツ(胸、ハンド、ハイ足など)はどちらのボディーにも使える。両者の決定的な違いはその材質と組み立てられ方だ。ソフビはコーテックスより価格が高いだからと言ってコーテックスより優れているということはなく、あなたが何を求めているかによってそれぞれに長所と短所がある。

コーテックスは子どもや初めてファッションドールを手に取る人向けのものだ。ソフビはこのスケールのファッションドールになれたドールユーザーのためにデザインされている。初めてのスマートドール、あるいはお子様のためのスマートドールならコーテックスを選ぶことをお勧めする。

それでももうちょい両者の違いが知りたい方は「コーテックスそれともソフビ製」の記事を読んでください。

Checkout Notes Checkout Notes

Asking for the following will result in a cancellation and refund of your order.

  1. Asking for a discount
  2. Asking us to lower the declaration value of your order
  3. Asking us to ship out ASAP
  4. Asking us to deliver by a particular date
  5. Asking us who shot first - Han or Greedo

Unfortunately we don't own DHL or FedEx (yet) nor do we have celestial powers over a pandemic to guarantee a delivery date on the other side of the world - and we don't enjoy it when people refuse to pay import taxes resulting in goods being returned to us. Not to mention that there are people who reject packages that don't arrive in time for a birthday.

We presume that your order is reliant on such requests being answered.
We can't do any of the above and can't tell you who shot first even though we think it was Han. So don't ask :-)

Asking for the following will result in a cancellation and refund of your order.

  1. Asking for a discount
  2. Asking us to lower the declaration value of your order
  3. Asking us to ship out ASAP
  4. Asking us to deliver by a particular date
  5. Asking us who shot first - Han or Greedo

Unfortunately we don't own DHL or FedEx (yet) nor do we have celestial powers over a pandemic to guarantee a delivery date on the other side of the world - and we don't enjoy it when people refuse to pay import taxes resulting in goods being returned to us. Not to mention that there are people who reject packages that don't arrive in time for a birthday.

We presume that your order is reliant on such requests being answered.
We can't do any of the above and can't tell you who shot first even though we think it was Han. So don't ask :-)

Clear Uncut Vinyl Body + Metallic Frame Kits

Clear Uncut Vinyl Body + Metallic Frame Kits

Regular price Regular price ¥86,900 (¥9,559,0.0 税込)

Find out how much is ¥86,900 JPY in your currency?




So I’ve got both good and bad news.

The good news is that the Clear bodies and Multiverse Metallic frames are packed and ready. These are great for customizations such as a clear body + human head combo, or prosthetics for a human. The only thing left is the usual expectation setting to make sure folks know the reasons why they want to avoid this product.

Now for the bad news part 1 - this product is a DIY kit. Each kit includes an uncut clear vinyl set and a pre-assembled Metallic Evolve frame, complete with a support stand - thats enough to build one clear body.

We don't have the capacity to cut the clear vinyl sets at this moment in time as our focus is always on the human skin tones - and then we only do gray if we can fit some in.
So for the foreseeable future, clear bodies will be sold as uncut kits. The frames are pre-assembled but you need to pull off the shins, feet and arms so that you can assemble the body. The spine attachment is much easier than before - you will need a plus screwdriver.

As for bad news part 2 - the initial and solitary production run of our Multiverse Metallic ended up inflicting damage on the molds. The culprit was metal deposits, which had accumulated in the molds from the molten plastic.

To illustrate this, compare the cocoa and cinnamon frame photo. The cocoa represents the default dimensions, while the cinnamon shows the result from the damaged molds. The metallic deposits imbued the chest with an almost bio-mechanical heart-like appearance - a somewhat cool albeit unintended effect.

The term "first and only run" comes into play because additional metallic productions would have compounded the metal deposit issue, leading to further growth of the bio-mechanical texture, and ultimately pushing the molds past the point of repair. Thankfully, the metallic batch was small, allowing us to remove the deposits and resurface the core and cavity to their original matte finish.

While the molds are now in working order, we’ve decided not to risk another metallic run, leading to a limited supply. This decision also means a shift in plans for our prosthetics, ruling out the use of metallic. We’re currently exploring alternatives, like a Black Navy frame, which has unexpectedly opened up possibilities for a new skin tone.

Included in this vinyl set is the clear Hikari 2 head and clear cyborg head cap.

If you are wanting to display the Metallic Evolve frame standalone, you may want to nab the free STL files for the Evolve head and hands to complete your display - I recommend spraying your 3D prints in a metallic finish to match the aesthetic.

As a reflection of its limited and challenging production, the clear vinyl body and metallic frame require more zenny than the usual. But before you rush to secure one out of FOMO, I’d like to share a few reasons why this set might not be the right choice for everyone.

Reasons not to buy

  1. Fresh out of the bag, the clear vinyl comes with a strong scent. It’s advisable to open the bag in a well-ventilated space or, ask your best friend (who you’re not particularly fond of) to do the honors. However, there’s a risk they might not hand it back, especially if they’re aware of your sentiments.
  2. Currently, we’re only able to provide uncut vinyl. If you find yourself unable to cut the vinyl yourself, the Smart Doll community boasts skilled individuals offering cutting services.
  3. Cutting clear vinyl can prove more challenging than its opaque counterpart, as it exhibits more resistance, necessitating a higher degree of precision and effort.
  4. Assembly instructions for the clear vinyl kit aren’t included. That being said, those who have previously assembled a Smart Doll should find the process relatively straightforward.
  5. The Evolve frame wasn’t initially designed for use with metallic Polyoxymethylene. This material’s distinct polymer properties result in different auditory and tactile responses compared to the standard human-skin tone Smart Doll.
  6. The clear vinyl surface isn’t inherently transparent. To achieve the clear effect, as seen on the right in the comparison photo, you’ll need to apply a gloss spray like "Mr Super Clear". The untreated vinyl is shown on the left. "Mr Super Clear" is not included ;-)
  7. This product does not come with a warranty. So, any mishaps during assembly or modification fall squarely on your shoulders.
  8. The metallic frame will only be available for a limited number of releases.
  9. This product, while being product grade, falls under our "Chaos" category. As such, it's not available for purchase to first-time buyers. This classification is not an insinuation that all first-time customers are potential fraudsters. Rather, it's a measure adopted in response to historical trends. Despite clear warnings, numerous first-time buyers of our Chaos items have demonstrated unrealistic expectations of perfection right out of the box. This misalignment often resulted in avoidable disputes and chargeback incidents.
  10. The frame is Evolve version v5.3.0. Evolve is not compatible with the previous Gen 2 frame.
  11. If we do get some spare cycles to cut the clear vinyl, we may release this set at the same price or slightly more.
  12. The price of this set may increase as we release the remaining batches. However, if this item is unpopular, the price will decrease.
  13. We probably can do 5 batches of the Metallic Frame+vinyl sets.
  14. Final reminder that this product is a kit and not a complete doll - it can be complete if you or a best friend cuts the vinyl and assembles it.
  15. The photo showing two clear bodies is for comparison purposes only - you do not get two sets for the price of one.
  16. There is a risk of making a boo boo during assembly which is why we are allowing folks to buy more than one set. Although there is a limited number, we do have enough for about 5 batches. Historically, folks get bored after a few batches so I'm guessing there will still be enough to go around - maybe ;-)
So I’ve got both good and bad news.

The good news is that the Clear bodies and Multiverse Metallic frames are packed and ready. These are great for customizations such as a clear body + human head combo, or prosthetics for a human. The only thing left is the usual expectation setting to make sure folks know the reasons why they want to avoid this product.

Now for the bad news part 1 - this product is a DIY kit. Each kit includes an uncut clear vinyl set and a pre-assembled Metallic Evolve frame, complete with a support stand - thats enough to build one clear body.

We don't have the capacity to cut the clear vinyl sets at this moment in time as our focus is always on the human skin tones - and then we only do gray if we can fit some in.
So for the foreseeable future, clear bodies will be sold as uncut kits. The frames are pre-assembled but you need to pull off the shins, feet and arms so that you can assemble the body. The spine attachment is much easier than before - you will need a plus screwdriver.

As for bad news part 2 - the initial and solitary production run of our Multiverse Metallic ended up inflicting damage on the molds. The culprit was metal deposits, which had accumulated in the molds from the molten plastic.

To illustrate this, compare the cocoa and cinnamon frame photo. The cocoa represents the default dimensions, while the cinnamon shows the result from the damaged molds. The metallic deposits imbued the chest with an almost bio-mechanical heart-like appearance - a somewhat cool albeit unintended effect.

The term "first and only run" comes into play because additional metallic productions would have compounded the metal deposit issue, leading to further growth of the bio-mechanical texture, and ultimately pushing the molds past the point of repair. Thankfully, the metallic batch was small, allowing us to remove the deposits and resurface the core and cavity to their original matte finish.

While the molds are now in working order, we’ve decided not to risk another metallic run, leading to a limited supply. This decision also means a shift in plans for our prosthetics, ruling out the use of metallic. We’re currently exploring alternatives, like a Black Navy frame, which has unexpectedly opened up possibilities for a new skin tone.

Included in this vinyl set is the clear Hikari 2 head and clear cyborg head cap.

If you are wanting to display the Metallic Evolve frame standalone, you may want to nab the free STL files for the Evolve head and hands to complete your display - I recommend spraying your 3D prints in a metallic finish to match the aesthetic.

As a reflection of its limited and challenging production, the clear vinyl body and metallic frame require more zenny than the usual. But before you rush to secure one out of FOMO, I’d like to share a few reasons why this set might not be the right choice for everyone.

Reasons not to buy

  1. Fresh out of the bag, the clear vinyl comes with a strong scent. It’s advisable to open the bag in a well-ventilated space or, ask your best friend (who you’re not particularly fond of) to do the honors. However, there’s a risk they might not hand it back, especially if they’re aware of your sentiments.
  2. Currently, we’re only able to provide uncut vinyl. If you find yourself unable to cut the vinyl yourself, the Smart Doll community boasts skilled individuals offering cutting services.
  3. Cutting clear vinyl can prove more challenging than its opaque counterpart, as it exhibits more resistance, necessitating a higher degree of precision and effort.
  4. Assembly instructions for the clear vinyl kit aren’t included. That being said, those who have previously assembled a Smart Doll should find the process relatively straightforward.
  5. The Evolve frame wasn’t initially designed for use with metallic Polyoxymethylene. This material’s distinct polymer properties result in different auditory and tactile responses compared to the standard human-skin tone Smart Doll.
  6. The clear vinyl surface isn’t inherently transparent. To achieve the clear effect, as seen on the right in the comparison photo, you’ll need to apply a gloss spray like "Mr Super Clear". The untreated vinyl is shown on the left. "Mr Super Clear" is not included ;-)
  7. This product does not come with a warranty. So, any mishaps during assembly or modification fall squarely on your shoulders.
  8. The metallic frame will only be available for a limited number of releases.
  9. This product, while being product grade, falls under our "Chaos" category. As such, it's not available for purchase to first-time buyers. This classification is not an insinuation that all first-time customers are potential fraudsters. Rather, it's a measure adopted in response to historical trends. Despite clear warnings, numerous first-time buyers of our Chaos items have demonstrated unrealistic expectations of perfection right out of the box. This misalignment often resulted in avoidable disputes and chargeback incidents.
  10. The frame is Evolve version v5.3.0. Evolve is not compatible with the previous Gen 2 frame.
  11. If we do get some spare cycles to cut the clear vinyl, we may release this set at the same price or slightly more.
  12. The price of this set may increase as we release the remaining batches. However, if this item is unpopular, the price will decrease.
  13. We probably can do 5 batches of the Metallic Frame+vinyl sets.
  14. Final reminder that this product is a kit and not a complete doll - it can be complete if you or a best friend cuts the vinyl and assembles it.
  15. The photo showing two clear bodies is for comparison purposes only - you do not get two sets for the price of one.
  16. There is a risk of making a boo boo during assembly which is why we are allowing folks to buy more than one set. Although there is a limited number, we do have enough for about 5 batches. Historically, folks get bored after a few batches so I'm guessing there will still be enough to go around - maybe ;-)

About Chaos Directors Uncut

This is a Chaos Directors Uncut product meaning that the part/s are...uncut.
Our vinyl components are created using a method known as Slush Casting, which has its pros and cons.

Pros
  • Low mold cost when compared to machined injection molds
  • Molds can (now) be made within 2 weeks.
  • Seamless vinyl parts

Cons
  • Extremely labor-intensive
  • High unit cost
  • High failure rate
  • Post-processing of flash can only be done by skilled crafts wo/men
We want folks to have more goodies but we simply do not have the wo/manpower. 

Chaos Director's Uncut is a way for us to make more uncut vinyl components available to folks who think they are a dab hand with their ninja DIY skills.

Reasons not to buy Chaos Directors Uncut items

  • One does not simply try to cut vinyl expecting the parts to look as our team members cut them. 
  • Cutting vinyl requires a craft knife or scalpel. Hard vinyl parts require a hairdryer or some method of warming the vinyl to make it soft enough to cut.
  • Using a knife has an inherent risk of cutting yourself. Please do not cut yourself or anybody or a nearby pet.
  • A vinyl component that has been overcut cannot be fixed, which means you may be doing a lot of crying.
  • All Chaos Directors Uncut vinyl parts have not been checked for blemishes.
  • Vinyl components are all different in size, even if pulled from the same mold. The reason is that each vinyl part is cast by a human - meaning that parts may be thin/thick or slightly elongated in the direction that they are pulled from the mold.

About Chaos Directors Uncut

This is a Chaos Directors Uncut product meaning that the part/s are...uncut.
Our vinyl components are created using a method known as Slush Casting, which has its pros and cons.

Pros
  • Low mold cost when compared to machined injection molds
  • Molds can (now) be made within 2 weeks.
  • Seamless vinyl parts

Cons
  • Extremely labor-intensive
  • High unit cost
  • High failure rate
  • Post-processing of flash can only be done by skilled crafts wo/men
We want folks to have more goodies but we simply do not have the wo/manpower. 

Chaos Director's Uncut is a way for us to make more uncut vinyl components available to folks who think they are a dab hand with their ninja DIY skills.

Reasons not to buy Chaos Directors Uncut items

  • One does not simply try to cut vinyl expecting the parts to look as our team members cut them. 
  • Cutting vinyl requires a craft knife or scalpel. Hard vinyl parts require a hairdryer or some method of warming the vinyl to make it soft enough to cut.
  • Using a knife has an inherent risk of cutting yourself. Please do not cut yourself or anybody or a nearby pet.
  • A vinyl component that has been overcut cannot be fixed, which means you may be doing a lot of crying.
  • All Chaos Directors Uncut vinyl parts have not been checked for blemishes.
  • Vinyl components are all different in size, even if pulled from the same mold. The reason is that each vinyl part is cast by a human - meaning that parts may be thin/thick or slightly elongated in the direction that they are pulled from the mold.